Shop

Sold Individually5/8 Front Coil Spring Spacer = 1-1/4 Lift (Aluminum)Coil Spring Spacers are used to raise the vehicle up if its too low, leveling it, and for weight jacking if the car is being raced. For most applications, coil sprig spacers are installed under the coil spring between the coil and the lower control arm. Some are installed on top of the coil spring between it and the frame. We offer three styles of spacers: Aluminum, Polyurethane, and Rubber. The applications determine which is available.Selecting a coil spring spacer for the front end has a simple formula you must remember, one-inch at the spring equals two-inches at the body. This applies to all Ford and GM models we deal with.Example 1: Lets say you want to raise your 1969 Camaro one-inch in the front. You would purchase two 1/2-inch spacers; one for each side. They install between the lower arm and spring. Your ride height will go up one full inch.Example 2: Lets say you want to raise the front of your GTO 1-1/2 inches because you cut to much off the spring. Using the formula one at the spring is two at the body, a 3/4-inch spacer is required to lift the front end up 1-1/2 inches. Ford works the same way.Rear spring spacers are available in polyurethane or aluminum. All of the rear spacers that raise the vehicle are made out of aluminum. Polyurethane is used for replacing the factory spring cushion. The formula for the rear GM models is one to one. Therefore if you want to raise the car 3/4 of an inch, use a 3/4 inch spacer.Enhance Your Ride with Our 5/8 Front Spacer for GM A-Body, B-Body, F-Body, and G-Body (1973-1996)At Global West, we understand the importance of a well-tuned suspension system for your classic American muscle car. Our 5/8 Front Spacer, part number 1704, is designed specifically for GM A-Body, B-Body, F-Body, and G-Body models from 1973 to 1996. This includes popular models like the Buick Century, Regal, Grand National, Chevrolet Chevelle, El Camino, Malibu, Monte Carlo, and Camaro. Crafted from high-quality aluminum, this spacer provides a 1-1/4 lift, perfect for leveling your vehicle or adjusting for race conditions.Our commitment to quality doesnt stop at our parts. We provide comprehensive DIY instructions and video tutorials to guide you through the installation process. And if you need further assistance, our dedicated customer support team is always ready to help. Were here to ensure you get the most out of your classic ride, whether youre hitting the track or cruising the open road.For more suspension solutions, check out our wide range ofBuick Parts Online. If youre working on a 1978-1988 Buick model, you might find ourBuick 1978-1988 PartsandBuick 1978-1988 Springsparticularly useful. At Global West, were dedicated to providing you with the best suspension components at competitive prices, offering huge value for your money.